Megapress press-in connection
With the Megapress press-in connection, Viega offers a real solution for the retrospective positioning of connections in an existing steel pipe installation. The pipe is simply drilled with the relevant tool set and then the threaded connection is pressed using a Viega press tool. E. g., a thermometer can be quickly fitted into an existing steel pipe installation without any laborious preliminary works. The installation can be used again immediately.
Insert up to 80% faster in any steel pipe installation.
The technology
a conventional drill, a Viega press tool and the adequate tool set are needed for the installation
the tool set contains a holding device, drill shaft and press tool insert in the practical case
the press-in connection is suitable for steel pipes in accordance with DIN EN 10220/10255 and is available for steel pipe dimensions of 1 ½", 2, 2 ½", 3", 4", 5" and 6"
equipped with an ¾" internal thread; a reducer for a ½" internal thread is also available
made from robust steel with zinc-nickel coating, reducer made of gunmetal
Viega offers a real solution for the retrospective positioning of connections in an existing steel pipe installation. The pipe is simply drilled with the relevant tool set and then the threaded connection is pressed using a Viega press tool.
The advantages
up to 80 % quicker than welding a connection
no welding, no fire watch, no smoke emissions
100 % leak-proof with integrated profile sealing element
any residual water that flows into the pipe is no problem with press technology
direct suction of any chippings by attaching an industrial vacuum cleaner to the holding device
reduction of operational downtimes and costs to a minimum
space saving due to small dimensions
simple work, even in hard-to-access places
unpressed connections are visible with the Viega SC-Contur
How to use
Step 1
Tighten the holding device firmly around the steel pipe to guide the drill shaft.
Step 3
Press the press-in connection into the pipe with the press machine and press insert.
Step 2
Drill using the drill shaft and a conventional drill, then remove the holding device.
