Advantix Vario Shower channel base unit
Advantix Vario Shower channel base unit
wall
continuously cut to length
drainage capacity accumulation height 10 mm (in accordance with EN 1253) 0.45 l/s
drainage capacity accumulation height 20 mm (in accordance with EN 1253) 0,6–0,75 l/s
installation wall depth 25 mm
quality controlled in accordance with DIN EN 1253
Model 4967.10
continuously cut to length
- for bonded sealing (tiled shower) or sealing lane
- plastic high-quality
Components
adjusting feet set, 4 closing pieces, drain set with good self-cleaning property, tile finishing strip flexibly adaptable, removable sieve insert, tile protection and control tool, cleaning brush, sealing flange, sealing accessories, saw guideTechnical data
water seal height 50 mmdrainage capacity accumulation height 10 mm (in accordance with EN 1253) 0.45 l/s
drainage capacity accumulation height 20 mm (in accordance with EN 1253) 0,6–0,75 l/s
installation wall depth 25 mm
Note
This drain model in its lowest installation version does not allow for adequate screed covering around the connection pipe. This has to be taken into account by the planning specialist in good time. A possible on-site solution with regard to the tile size and/or possible casting with epoxy resin must be considered in planning!quality controlled in accordance with DIN EN 1253
Model 4967.10
Articles table
L | CH | DN | PU | Article | amount |
---|---|---|---|---|---|
L | CH | DN | PU | Article | amount |
300–1200 | 90–160 | 40/50 | 1/32 | 736 552 |
|
CH = construction height
Warehouse labels - labels and cardboard
CAD files
certificates
Downloads
0 Results