Advantix Cleviva Shower channel

with Advantix inlay Visign C1

• for bonded sealing (tiled shower), self-​levelling coating
• stainless steel 1.4301

Components

shower channel profile, inlay, odour trap, mounting flange, sealing collar pre-​assembled at the factory, height adjustment piece, drain pipe, sieve insert, fixing set

Technical data

load class K=300 kg
water seal height 50 mm
drainage capacity accumulation height 10 mm (in accordance with EN 1253) 0,5–0,65 l/s
drainage capacity accumulation height 20 mm (in accordance with EN 1253) 0,55–0,7 l/s

Note

The indicated drainage capacity will be reached with sieve insert.
This drain model does not allow for adequate screed covering due to the high position of the connection pipe. This has to be taken into account by the planning specialist in good time. A possible on-​site solution with regard to the tile size and/or possible casting with epoxy resin must be considered in planning!
quality controlled in accordance with DIN EN 1253

Model 4981.10